#!/bin/sh /etc/rc.common

START=90
STOP=20

USB_DEPLOY_ROOT_PATH=$1
PIPE_PATH="/tmp/thunder/tmp/etm_hubble_report.pipe"
#flag=`uci get xiaoqiang.common.PRIVACY`
flag=0

if [ -n "$USB_DEPLOY_ROOT_PATH" ];then
	XUNLEI_LOG_INI_FILE="$USB_DEPLOY_ROOT_PATH/xiaomi_router/config/log.ini"
	XUNLEI_LOG_FILE="$USB_DEPLOY_ROOT_PATH/xiaomi_router/log/etm.log"
	HUBBLE_LOG_INI_FILE="$USB_DEPLOY_ROOT_PATH/xiaomi_router/config/hubble_log.ini"
	HUBBLE_LOG_FILE="$USB_DEPLOY_ROOT_PATH/xiaomi_router/log/hubble.log"
fi

export PROCLINE="nice -n 19 $USB_DEPLOY_ROOT_PATH/xiaomi_router/bin/etm --system_path=/tmp/thunder/tmp --disk_cfg=$USB_DEPLOY_ROOT_PATH/xiaomi_router/config/thunder_mounts.cfg --etm_cfg=$USB_DEPLOY_ROOT_PATH/xiaomi_router/config/etm.ini --log_cfg=$XUNLEI_LOG_INI_FILE --deviceid=`/sbin/uci get /etc/config/messaging.deviceInfo.DEVICE_ID` --hardwareid=`/usr/bin/matool --method idForVendor --params adaccf1f-8b8c-edcb-d533-770099d2ef20` --pid_file=/var/run/xunlei.pid --license=1406200001000002q000593w1nt5v16gwfx6cv7n0r --import_v1v2_mode=2 --advanced_hardware_config=0 --hubble_report_pipe_path=$PIPE_PATH --ntfs_type=1"
export PROCFLAG="$USB_DEPLOY_ROOT_PATH/xiaomi_router/bin/etm --system_path=/tmp/thunder/tmp --disk_cfg=$USB_DEPLOY_ROOT_PATH/xiaomi_router/config/thunder_mounts.cfg --etm_cfg=$USB_DEPLOY_ROOT_PATH/xiaomi_router/config/etm.ini --log_cfg=$XUNLEI_LOG_INI_FILE --deviceid=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --hardwareid=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --pid_file=/var/run/xunlei.pid --license=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --import_v1v2_mode=2 --advanced_hardware_config=0 --hubble_report_pipe_path=$PIPE_PATH --ntfs_type=1"
export PROC_CHANGE_DIR_PATH="$USB_DEPLOY_ROOT_PATH/xiaomi_router/bin"
export PROC_FAST_REBOOT="1"

export PROC_USE_CGROUP_PATH="/dev/cgroup/net_cls/limited/tasks;/dev/cgroup/mem/group1/tasks"
export EXTRA_COMMANDS=" status"

#super-port set

TCPPORTS='1080 4662 2080 2062'
UDPPORTS='4661 3027 888 666 2037 2061 2048 2066'

set_xunlei_firewall(){
	local ctlop="$1"
	if [ -z "$ctlop" ]
		then
		ctlop='stop'
	fi
	if [ "$ctlop" != 'stop' -a "$ctlop" != 'start' ]
		then
		echo "WARNING: unknow operation: $ctlop, set to stop."
		ctlop='stop'
	fi
	if [ "$ctlop" = 'stop' ]
		then
			uci delete firewall.xunleiwantcpports 2>/dev/null
			uci delete firewall.xunleiwanudpports 2>/dev/null
			uci commit
			if [ $? -ne 0 ]
				then
				echo "ERROR: remove xunleiwan rules config/firewall failed."
				return 1
			else
				fw3 reload >/dev/null 2>&1
				return $?
			fi
		return 0
	fi
	#start here
	uci set firewall.xunleiwantcpports=rule 2>/dev/null
	uci set firewall.xunleiwantcpports.name="'xunlei wan accept tcp port $TCPPORTS'" 2>/dev/null
	uci set firewall.xunleiwantcpports.src=wan 2>/dev/null
	uci set firewall.xunleiwantcpports.dest_port="${TCPPORTS}" 2>/dev/null
	uci set firewall.xunleiwantcpports.proto=tcp 2>/dev/null
	uci set firewall.xunleiwantcpports.target=ACCEPT 2>/dev/null

	uci set firewall.xunleiwanudpports=rule 2>/dev/null
	uci set firewall.xunleiwanudpports.name="xunlei wan accept udp port $UDPPORTS" 2>/dev/null
	uci set firewall.xunleiwanudpports.src=wan 2>/dev/null
	uci set firewall.xunleiwanudpports.dest_port="${UDPPORTS}" 2>/dev/null
	uci set firewall.xunleiwanudpports.proto=udp 2>/dev/null
	uci set firewall.xunleiwanudpports.target=ACCEPT 2>/dev/null

	uci commit firewall
	if [ $? -ne 0 ]
		then
		echo "ERROR: setup xunleiwan rules config/firewall failed."
		return 1
	else
		fw3 reload >/dev/null 2>&1
		return $?
	fi
}

start() {
	#set_xunlei_firewall start
	if [ -f $XUNLEI_LOG_INI_FILE ];then
		rm -f $XUNLEI_LOG_INI_FILE
	fi
	if [ -f $HUBBLE_LOG_INI_FILE ];then
		rm -f $HUBBLE_LOG_INI_FILE
	fi

	touch $XUNLEI_LOG_INI_FILE &> /dev/null
	echo "level=WARN" >> "$XUNLEI_LOG_INI_FILE"
	echo "file=$XUNLEI_LOG_FILE" >> "$XUNLEI_LOG_INI_FILE"
	echo "max_file_size=2M" >> "$XUNLEI_LOG_INI_FILE"
	echo "max_file_number=2" >> "$XUNLEI_LOG_INI_FILE"
	
	touch $HUBBLE_LOG_INI_FILE &> /dev/null
	echo "level=WARN" >> "$HUBBLE_LOG_INI_FILE"
	echo "file=$HUBBLE_LOG_FILE" >> "$HUBBLE_LOG_INI_FILE"
	echo "max_file_size=2M" >> "$HUBBLE_LOG_INI_FILE"
	echo "max_file_number=2" >> "$HUBBLE_LOG_INI_FILE"

	if [ -n "$USB_DEPLOY_ROOT_PATH" ];then
		sed -i "s#/extdisks/[a-z]\{3,4\}[0-9]\{1,2\}/#$USB_DEPLOY_ROOT_PATH/#g" $USB_DEPLOY_ROOT_PATH/xiaomi_router/config/thunder_mounts.cfg
	fi

	mkdir -p /tmp/thunder/tmp
	mkdir -p /tmp/thunder/cfg

	[ "$flag" = "1" ] && {
		echo "start hubble report"
		$USB_DEPLOY_ROOT_PATH/xiaomi_router/bin/hubble --system_path=/tmp/thunder/tmp --hubble_report_pipe_path=$PIPE_PATH --hubble_log_cfg=$HUBBLE_LOG_INI_FILE --etm_cfg=$USB_DEPLOY_ROOT_PATH/xiaomi_router/config/etm.ini &
	}

	/usr/sbin/supervisord start
	return $?
}

stop() {
	if [ "$PROC_CALLER" != "/etc/init.d/rcS K shutdown" ]
		then
		echo  
			#set_xunlei_firewall stop
	fi

	/usr/sbin/supervisord stop

	#killall -9 hubble
	return $?
}

restart() {
	stop
	sleep 1
	start
	return $?
}

reload(){
	stop
	sleep 1
	rm $USB_DEPLOY_ROOT_PATH/ThunderDB -rf
	start
	return $?
}

status(){
	/usr/sbin/supervisord status
	ret=$?
	echo $ret
	return $ret
}

#